Filter
Top Products
ASUS PR-DLS533 motherboard user guide
5-45
2. The dd image is located in the zipped file you downloaded from the
LSI Logic web site.
3. RAWRITE3.COM is included within the zipped file you downloaded
from the LSI Logic web site.
After the image has been copied to a 3.5 diskette, use this HBA
diskette for UnixWare installations as instructed.
B. New System Installation
1. Boot the computer using the installation diskettes or the installation
CDROMs delivered in the UnixWare Operating System media kit.
2. Follow the instructions on the screen.
3. Insert the mpt driver diskette when prompted to insert a host adapter
diskette.
The system loads the required drivers, such as mpt, and indicates
when they are loaded. At the end of the installation, you will see a
prompt to reinsert the HBA driver diskette.
4. Insert the mpt driver diskette and press Enter.
The kernel builds and the installation terminates.
6. Remove the driver diskette when prompted to do so and reboot the
system.
C. Existing System Installation
Before you install the mpt driver, make a backup copy of the existing
kernel. The backup and installation procedures follow.
1. Log on as root.
2. At the shell prompt type:
cp /stand/unix /stand/unix.safe
Use this copy of the old kernel to reboot the system if the driver
installation fails. Refer to the section titled Troubleshooting for more
information.
3. Once the old kernel is saved, insert the mpt UnixWare driver diskette.
4. Load the driver using the pkgadd command by typing:
pkgadd -d diskette1