Filter
Top Products
5-34
Chapter 5: Driver installation
B. NetWare 5.1/6.0 Installations
1. From the NetWare console, type NWCONFIG or Load Install and
press <Enter>.
2. From the Configuration Options screen, choose Driver options and
press <Enter>.
3. Choose Configure network drivers and press <Enter>. If any drivers
are already loaded, a list of them appears.
4. Choose Load an additional driver and press <Enter>. A list of drivers
appears.
5. Insert the Intel CD or floppy disk you've created and choose Install an
unlisted driver by pressing <Insert>.
6. If you're using a floppy disk, insert the disk in drive A and
press <Enter>. If you've mounted the CD as a NetWare volume,
press <F3> and enter the source path (CD volume).
5. Insert the floppy disk into the floppy disk drive when prompted.
6. Follow the screen instructions to complete the process.