Filter
Top Products
ASUS PR-DLS533 motherboard user guide
4-21
Onboard SCSI BIOS [Auto]
[Auto] allows the motherboard BIOS to detect whether you have a Adaptec
SCSI controller. If the SCSI controller is detected, the SCSI BIOS will be
enabled. If no SCSI controller is detected, the onboard SCSI BIOS will be
disabled.
Setting to [Disabled] deactivates the onboard SCSI BIOS so that the
BIOS on an add-on SCSI card can be used. If your SCSI card does not
have a BIOS, the SCSI card will not function. Configuration options: [Auto]
[Disabled]
ONB SCSI BIOS First [No]
This field allows giving priority to the onboard SCSI BIOS for SCSI
functions over other SCSI controllers. Configuration options: [No] [Yes]
ONB Primary SCSI Term [Enabled]
ONB Secondary SCSI Term [Enabled]
This field allows you to enable or disable the onboard termination for the
primary and secondary SCSI channels. Configuration options: [Enabled]
[Disabled]
Primary VGA BIOS First [PCI VGA Card]
This field allows you to select the primary graphics card. Configuration
options: [PCI VGA Card] [Onboard VGA]
USB Function [Enabled]
Set this field to [Enabled] if you want to use Universal Serial Bus devices.
Configuration options: [Disabled] [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard 2nd LAN Boot ROM [Disabled]
When set to [Enabled], these fields allow the system to boot from the
network using the onboard LAN controller boot ROM. Configuration
options: [Disabled] [Enabled]