Filter
Top Products
ASUS PR-DLS533 motherboard user guide
5-31
5.5 Novell
®
NetWare
®
Server
5.5.1 LSI
®
SCSI Driver Installation
A single driver (*HAM) is provided for the Novell NetWare 5.1/6.0
environments. This document explains how to install and use the SDMS
NWPA SCSI Host Adapter Module (HAM) driver for NetWare.
A. Preparing an LSI Driver Disk
From the support CD, locate the LSI drivers in the following path:
\Drivers\SCSI\FUSION-MPT\Netware\3.00.000\
Copy all the drivers into a diskette and it will be used for the NetWare
system installation. Label it “LSI driver for NetWare.”
B. New System Installation
1. Begin the file server installation according to the instructions in the file
server installation chapter in the Novell NetWare Installation Manual.
2. When the NetWare installation procedure prompts you for a Disk
Driver, insert the LSI Logic device driver diskette into drive A: or B:.
Then use the INS key to select an unlisted driver. A dialog box
appears. If the driver diskette is in the A: drive, press Enter to
continue. If the driver diskette is in the B: drive, press F3 (to specify
the path to search for the driver), and enter the drive letter B:\ and
press Enter. The LSIMPTNW.HAM driver will appear as a selection.
NOTE: If the INS key option does not appear during the installation,
choose Server Drivers to go to the Summary page. Highlight Disk and
CD-ROM Drivers (e.g., IDEATA). Press Enter and load an additional
driver.
Then press the INS key. The system defaults to the A: path. Highlight
the LSI Logic NWPA driver and press Enter. Select Yes to save and
move the driver into the operating system. Press Enter to copy the
files.