Asus RS100-E5-PI2 Server User Manual


  Open as PDF
of 148
 
ASUS RS100-E5-PI2 6-9
6.2.6 Rebuilding the RAID
This option is only for the RAID 1 set.
Rebuilding the RAID with other non-RAID disk
If any of the SATA hard disk drives included in the RAID array failed, the system
displays the status of the RAID volume as “Degraded” during POST. You can
rebuild the RAID array with other installed non-RAID disks.
To rebuild the RAID with other non-RAID disk:
1. At the prompt, press <Ctrl> + <I> to enter the Intel Matrix Storage Manager
RAID conguration.
2. If there is a non-RAID SATA Hard Disk available, the utility will prompt to
rebuild the RAID. Press <Enter>, then use up/down arrow keys to select the
destination disk or press <ESC> to exit.
Select a destination disk with the same size as the original hard disk.
3. The utilty immediately starts rebuilding after the disk is selected. The status
of the degraded RAID volume is changed to “Rebuild”.
[ DEGRADED VOLUME DETECTED ]
[↑↓]-Previous/Next[SPACE]-Selects[ENTER]-SelectionComplete
“Degraded“ volume and disk available for rebuilding detected.
Selecting a disk initiates a rebuild. Rebuild completes in the
operating system.
Select the port of destination disk for rebuilding (ESC to exit):
Port Drive Model Serial# Size
3HDS722580VLSA80 VN6Bxxxx 76.7GB
Intel(R)MatrixStorageManagerOptionROMv5.6.2.1002ICH7RwRAID5
Copyright(C) 2003-06 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3.ResetDiskstoNon-RAID
4.Exit
RAID Volumes:
IDNameLevelStripSizeStatusBootable
0Volume0RAID0(Stripe)128KB306.8GBRebuild Yes
PhysicalDisks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HDS72161 PVB300Z2R93D3D 153.4GB Non-RAIDDisk
3 Hitachi HDS72161 PVB300Z2R93D3D 153.4GB Non-RAIDDisk
[↑↓]-Select[ESC]-Exit[ENTER]-SelectMenu
[ DISK/VOLUMEINFORMATION]
[ MAIN MENU ]
 previous next