Filter
Top Products
2-13ASUS RS100-E5-PI2
3. Secure the chassis fans with two
screws.
4. Connect the chassis fans cable to the onboard fan connectors labeled
CPU_FAN1 and FRNT_FAN1. Refer to the illustration below for the location
of CPU_FAN1 and FRNT_FAN1 connectors.
P5BV-M/RS100-E5
CPU/Chassis Fan Connectors
®
P5BV-M/RS100-E5
GND
FANPWR2
CPU_FAN1
GND
FANPWR2
FAN PWM
FRNT_FAN1
FAN PWM
Chassis fan screws
2.5.2 Installing Serial ATA drives
To install primary Serial ATA drive:
1. Locate the Serial ATA drive bay
beside the power supply unit.
Notice the four standard screw
holes.
You can install up to two (2) Serial ATA hard disk drives to the system. Follow the
succeeding instructions to install each of the drives.