Asus RS100-E5-PI2 Server User Manual


  Open as PDF
of 148
 
5-20 Chapter 5: BIOS setup
5.4.6 ChipsetConguration
The Chipset Conguration menu allows you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
NorthBridgeConguration
Advanced Chipset Settings
WARNING:Settingwrongvaluesinbelowsections
may cause system to malfunction.
NorthBridgeConguration
SouthBridgeConguration
CongureNorthBridge
features.
BIOS SETUP UTILITY
Advanced
BIOS SETUP UTILITY
Advanced
NorthBridgechipsetConguration
MemoryRemapFeature [Enabled]
PCIMMIOAllocation:4GBTo3584MB
DRAMFrequency [Auto]
CongureDRAMTimingbySPD [Enabled]
InitiateGraphicAdapter  [PEG/PCI]
PEGPortConguration
PEGPort [Auto]
ENABLE: Allow
remapping of
overlapped PCI memory
abovethetotal
physical memory.
DISABLE: Do not allow
remapping of memory.
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-bit
operating system.
Conguration options: [Disabled] [Enabled]
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency.
Conguration options: [Auto] [667 MHz] [800 MHz]
CongureDRAMTimingbySPD[Enabled]
When this item is enabled, the DRAM timing parameters are set according to the
DRAM SPD (Serial Presence Detect). When disabled, you can manually set the
DRAM timing parameters through the DRAM sub-items.
Conguration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Conguration options: [PCI/PEG] [PEG/PCI]
PEGPortConguration
PEG Port [Auto]
Conguration options: [Auto] [Disabled]
 previous next