Asus RS100-E5-PI2 Server User Manual


  Open as PDF
of 148
 
7-4 Chapter 7: Driver installation
7.1.2 Installing the RAID controller driver
Windows
®
Server OS
During Windows
®
Server OS installation
To install the RAID controller driver when installing Windows
®
Server OS:
1. Boot the computer using the Windows
®
Server installation CD. The Windows
®
Setup starts.
2. Press <F6> when the message “Press F6 if you need to install a third
party SCSI or RAID driver...” appears at the bottom of the screen.
3. When prompted, press <S> to specify an additional device.
Press F6 if you need to install a third party SCSI or RAID driver...
Windows Setup
S=SpecifyAdditionalDeviceENTER=ContinueF3=Exit
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
diskcontrollersforusewithWindows,includingthosefor
whichyouhaveadevicesupportdiskfromamassstoragedevice
manufacturer, press S.
*Ifyoudonothaveanydevicesupportdisksfromamassstorage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
 previous next