Filter
Top Products
Chapter 2: Hardware setup2-16
4. Insert the Serial ATA drive into the
drive plate as shown.
7. Connect the other end of the
Serial ATA signal connector to the
onboard SATA connector labeled
SATA3.
P5BV-M/RS100-E5
SATA3 Connector
®
P5BV-M/RS100-E5
SATA3
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
5. Secure the hard drive with four
screws.
6. Connect the Serial ATA signal cable
and ATX power connectors. Use
the L-type Serial ATA connector to
connect to the hard drive.
SATA L-type
connector
ATX power connector
SATA signal cable