Filter
Top Products
Version 6.2 101 December 2010
SIP Release Notes 1. What's New in Release 6.2
1.11.6 Management and Provisioning New Parameters
The table below describes the new management and provisioning parameter for Release
6.2.
Notes: These parameters are applicable to the Gateway and SBC applications.
Table 1-10: New Management and Provisioning Parameter for Release 6.2
Parameter Description
[SNMPEngineIDString]-
Defines the SNMP engine ID for SNMPv3/SNMPv2 agents. This is
used for authenticating a user attempting to access the agent on the
device.
The ID can be a string of up to 36 characters. The default value is
00:00:00:00:00:00:00:00:00:00:00:00 (12 Hex octets characters). The
provided key must be set with 12 Hex values delimited by a colon (":")
in the format xx:xx:...:xx. For example,
00:11:22:33:44:55:66:77:88:99:aa:bb
Notes:
For this parameter to take effect, a device reset is required.
Before setting this parameter, all SNMPv3 users must be deleted;
otherwise, the parameter setting is ignored.
If the supplied key does not pass validation of the 12 Hex values
input or it is set with the default value, the engine ID is generated
according to RFC 3411.