Filter
Top Products
SIP Release Notes 102 Document #: LTRT-26901
CPE SIP Products
1.12 Modified Parameters
This section describes parameters from the previous release that have been modified in
Release 6.2.
1.12.1 SIP Parameters
This section describes SIP parameters from the previous release that have been modified
in Release 6.2.
1.12.1.1 SIP General Parameters
The table below describes the SIP general parameters from the previous release that have
been modified in Release 6.2.
Table 1-11: Modified SIP General Parameters for Release 6.2
Parameter Description
Coders Group Table
[CodersGroup0]
[CodersGroup1]
[CodersGroup2]
[CodersGroup3]
[CodersGroup4]
Modifications:
WB-RTA (Mediant 3000)
G.722 (Mediant 800 MSBG) AMR-WB (Mediant 800 MSBG)
Transparent ptime (Mediant 600, Mediant 1000, Mediant 1000
MSBG, Mediant 2000)
The format of this parameter is as follows:
[ CodersGroup0]
FORMAT CodersGroup0_Index = CodersGroup0_Name,
CodersGroup0_pTime, CodersGroup0_rate,
CodersGroup0_PayloadType, CodersGroup0_Sce;
[ \CodersGroup0 ]
Coder Name Packetization
Time (msec)
Rate (kbps) Payload
Type
Silence
Suppression
WB-MS-RTA
[ms_rta_wb]
20 ms 29000 114 n/a
G.722
[g722]
20 (default),
40, 60, 80, 100,
120
64 (default)
Always 9 N/A
AMR-WB
[Amr-WB]
20 (default) 6.6 [0],
8.85 [1],
12.65 [2],
14.25 [3],
15.85 [4],
18.25 [5],
19.85 [6],
23.05 [7],
23.85 [8]
(default)
Dynamic (0-
127)
Disable [0]
Enable [1]
Transparent
[Transparent]
10, 20
(default), 40,
60, 80, 100,
120
Always 64 Dynamic (0-
127)
Disable [0]
Enable [1]