Filter
Top Products
Version 6.2 105 December 2010
SIP Release Notes 1. What's New in Release 6.2
Parameter Description
Trunk Group Settings Table
[TrunkGroupSettings]
Modifications: New ChannelSelectMode options:
[9] Ring to Hunt Group (MP-1xx, Mediant 600, Mediant 800 MSBG,
Mediant 1000 MSBG, Mediant 1000) [10] Select Trunk by ISDN
Supplementary Services Table (Mediant 600, Mediant 800 MSBG,
Mediant 1000 MSBG, Mediant 1000)
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType;
[\TrunkGroupSettings]
Where ChannelSelectMode defines the method for allocating
incoming IP-to-Tel calls to a channel (port):
[0] By Dest Phone Number = Selects the device's channel
according to the called number (default.)
[1] Cyclic Ascending = Selects the next available channel in an
ascending cyclic order. Always selects the next higher channel
number in the Trunk Group. When the device reaches the highest
channel number in the Trunk Group, it selects the lowest channel
number in the Trunk Group and then starts ascending again.
[2] Ascending = Selects the lowest available channel. It always
starts at the lowest channel number in the Trunk Group and if that
channel is unavailable, selects the next higher channel.
[3] Cyclic Descending = Selects the next available channel in
descending cyclic order. It always selects the next lower channel
number in the Trunk Group. When the device reaches the lowest
channel number in the Trunk Group, it selects the highest channel
number in the Trunk Group and then starts descending again.
[4] Descending = Selects the highest available channel. It always
starts at the highest channel number in the Trunk Group and if that
channel is unavailable, selects the next lower channel.
[5] Dest Number + Cyclic Ascending = The device first selects the
channel according to the called number. If the called number isn't
found, it then selects the next available channel in ascending cyclic
order. Note that if the called number is found but the port
associated with this number is busy, the call is released.
[6] By Source Phone Number = The device selects the channel
according to the calling number.
[7] Trunk Cyclic Ascending = The device selects the channel from
the first channel of the next trunk (adjacent to the trunk from which
the previous channel was allocated). This option is applicable only
to digital interfaces.
[8] Trunk & Channel Cyclic Ascending = The device implements the
Trunk Cyclic Ascending and Cyclic Ascending methods to select the
channel. This method selects the next physical trunk (pertaining to
the Trunk Group) and then selects the B-channel of this trunk
according to the cyclic ascending method (i.e., selects the channel
after the last allocated channel). This option is applicable only to
digital interfaces.