Filter
Top Products
Version 6.2 91 December 2010
SIP Release Notes 1. What's New in Release 6.2
Parameter Description
R-Value Delay Threshold
[VQMonEOCRValTHR]
Voice quality monitoring - end of call low quality alert threshold. if set
to -1 (default), no alerts are issued.
RTCP Packet Interval
[RTCPInterval]
Defines the time interval (in msec) between adjacent RTCP reports.
The interval range is 0 to 65,535. The default interval is 5,000.
Disable RTCP Interval
Randomization
[DisableRTCPRandomize]
Controls whether RTCP report intervals are randomized or whether
each report interval accords exactly to the parameter RTCPInterval.
[0] Disable = Randomize (default)
[1] Enable = No Randomize
Esc Transport Type
[RTCPXRESCTransportTy
pe]
Determines the transport layer used for outgoing SIP dialogs initiated
by the device to the RTCP XR Collection Server.
[-1] Not Configured (default)
[0] UDP
[1] TCP
[2] TLS
Note: When set to ‘Not Configured’, the value of the parameter
SIPTransportType is used.
RTCP XR Collection Server
[RTCPXREscIP]
IP address of the Event State Compositor (ESC). The device sends
RTCP XR reports to this server, using SIP PUBLISH messages. The
address can be configured as a numerical IP address or as a domain
name.
RTCP XR Report Mode
[RTCPXRReportMode]
Determines whether RTCP XR reports are sent to the Event State
Compositor (ESC), and if so, defines the interval in which they are
sent.
[0] Disable = RTCP XR reports are not sent to the ESC (default).
[1] End Call = RTCP XR reports are sent to the ESC at the end of
each call.
[2] End Call & Periodic = RTCP XR reports are sent to the ESC at
the end of each call and periodically according to the parameter
RTCPInterval.