Filter
Top Products
SIP Release Notes 36 Document #: LTRT-26901
CPE SIP Products
17. Table Increase for Source Phone Number Manipulation Table for IP-to-Tel Calls:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
The Source Phone Number Manipulation Table for IP-to-Tel Calls table
(SourceNumberMapIP2Tel parameter) has been increased from 20 to 120 indices
(rows).
18. Enhanced IP-to-Tel Number Manipulation:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature provides support for configuring enhanced (additional) source and
destination number manipulation rules for IP-to-Tel calls. This feature enhances the
use of the existing number manipulation tables (NumberMapIP2Tel and
SourceNumberMapIP2Tel parameters for destination and source number
manipulation, respectively). The initial and additional number manipulations are both
done in these tables. The additional manipulation is performed on the initially
manipulated source and destination numbers. Therefore, additional manipulation can
be implemented to perform complex manipulation rules that can now be
accommodated by the limiting size of the manipulation tables.
This feature is enabled using the following new parameters:
• PerformAdditionalIP2TELSourceManipulation for source number manipulation
• PerformAdditionalIP2TELDestinationManipulation for destination number
manipulation