Filter
Top Products
Version 6.2 25 December 2010
SIP Release Notes 1. What's New in Release 6.2
12. Increased Characters for Request-URI Host Name per IP Group:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
The maximum number of characters has been increased from 49 to 100 for defining
the SIP Request-URI host name used in INVITE and REGISTER messages sent to an
IP Group, or the host name in the From header of INVITE messages received from the
IP Group. This host name is defined using the SIP Group Name parameter
(IPGroup_SIPGroupName) in the IP Group table (IPGroup parameter).
13. Destination SRD in Tel-to-IP Routing Table:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature provides support for defining an SRD as the IP destination for Tel-to-IP
routing rules in the Outbound IP Routing table (Prefix parameter). Therefore, any one
of the following IP destinations can be configured in this table:
• IP address or FQDN (existing support).
• IP Group - the call is routed to the Proxy Set (IP address) or SRD associated with
the IP Group (existing support).
• SRD - the call is routed as follows (new support):
♦ Proxy Set associated with the SRD.
♦ If a Proxy Set is not defined for the SRD, then the call is sent to:
Media/RTP (voice): Media Realm (media port and media IP interface)
associated with SRD.
SIP signaling: SIP Interface (SIP port and control IP interface)
associated with SRD.