Filter
Top Products
SIP Release Notes 98 Document #: LTRT-26901
CPE SIP Products
Parameter Description
BRI Supplementary Services Table
[ISDNSuppServ]
This table configures the BRI endpoints and their authentication
and caller ID settings.
[ ISDNSuppServ ]
FORMAT ISDNSuppServ_Index =
ISDNSuppServ_PhoneNumber, ISDNSuppServ_Module,
ISDNSuppServ_Port, ISDNSuppServ_UserId,
ISDNSuppServ_UserPassword, ISDNSuppServ_CallerID,
ISDNSuppServ_IsPresentationRestricted,
ISDNSuppServ_IsCallerIDEnabled;
[ \ISDNSuppServ ]
Where:
PhoneNumber = The telephone extension number for the BRI
endpoint.
Module = The BRI module number to which the BRI
extension pertains.
Port = The port number (on the BRI module) to which the BRI
extension is connected.
UserID = User ID for registering the BRI endpoint to a third-
party softswitch for authentication and/or billing.
UserPassword = User password for registering the BRI
endpoint to a third-party softswitch for authentication and/or
billing. Note: For security, the password is displayed as an
asterisk (*).
CallerID = Caller ID name of the BRI extension (sent to the IP
side). The valid value is a string of up to 18 characters.
IsPresentationRestricted = Determines whether the BRI
extension sends its Caller ID information to the IP when a call
is made.
[0] Allowed = The device sends the string defined in the
'Caller ID' field when this BRI extension makes a Tel-to-
IP call.
[1] Restricted = The string defined in the 'Caller ID' field
is not sent.
IsCallerIDEnabled = Enables the receipt of Caller ID.
[0] Disabled = The device does not send Caller ID
information to the BRI extension.
[1] Enabled = The device sends Caller ID information to
the BRI extension
For example:
ISDNSuppServ 0 = 400, 1, 1, user, pass, callerid, 0, 1;
ISDNSuppServ 1 = 401, 1, 1, user, pass, callerid, 0, 1;