Filter
Top Products
SIP Release Notes 106 Document #: LTRT-26901
CPE SIP Products
Parameter Description
[9] Ring to Hunt Group = The device allocates IP-to-Tel calls to all
the FXS ports (channels) belonging to a specific Hunt Group. When
an IP-to-Tel call is received by the device for a specific Hunt Group,
all telephones connected to the FXS ports belonging to the Hunt
Group start ringing. The call is eventually received by whichever
telephone answers the call first (and the other phones will stop
ringing).
[10] Select Trunk by ISDN SuppServ Table = The device selects
the BRI port/module according to the settings in the ISDN
Supplementary Services table.
IP Profile Table
[IPProfile]
Modifications:
AMD parameters added: AMDSensitivityParameterSuit,
AMDSensitivityLevel, AMDMaxGreetingTime,
AMDMaxPostGreetingSilenceTime (Mediant 600, Mediant 1000
MSBG, Mediant 1000, Mediant 2000, Mediant 3000)
SBCDiversionMode, SBCHistoryInfoMode (Mediant 800 MSBG,
Mediant 1000 MSBG, Mediant 3000)
[IPProfile]
FORMAT IPProfile_Index = IPProfile_ProfileName,
IPProfile_IpPreference, IPProfile_CodersGroupID,
IPProfile_IsFaxUsed, IPProfile_JitterBufMinDelay,
IPProfile_JitterBufOptFactor, IPProfile_IPDiffServ,
IPProfile_SigIPDiffServ, IpProfile_SCE,
IPProfile_RTPRedundancyDepth, IPProfile_RemoteBaseUDPPort,
IPProfile_CNGmode, IPProfile_VxxTransportType,
IPProfile_NSEMode, IpProfile_IsDTMFUsed,
IPProfile_PlayRBTone2IP, IPProfile_EnableEarlyMedia,
IPProfile_ProgressIndicator2IP, IPProfile_EnableEchoCanceller,
IPProfile_CopyDest2RedirectNumber,
IPProfile_MediaSecurityBehaviour, IPProfile_CallLimit, IPProfile_
DisconnectOnBrokenConnection, IPProfile_FirstTxDtmfOption,
IPProfile_SecondTxDtmfOption, IPProfile_RxDTMFOption,
IpProfile_EnableHold, IpProfile_InputGain, IpProfile_VoiceVolume,
IpProfile_AddIEInSetup, IpProfile_SBCExtensionCodersGroupID,
IPProfile_MediaIPVersionPreference, IPProfile_TranscodingMode,
IpProfile_SBCAllowedCodersGroupID,
IpProfile_SBCAllowedCodersMode,
IpProfile_SBCMediaSecurityBehaviour,
IpProfile_SBCRFC2833Behavior,
IpProfile_SBCAlternativeDTMFMethod, IpProfile_SBCAssertIdentity,
IpProfile_AMDSensitivityParameterSuit,
IpProfile_AMDSensitivityLevel, IpProfile_AMDMaxGreetingTime,
IpProfile_AMDMaxPostSilenceGreetingTime,
IpProfile_SBCDiversionMode, IpProfile_SBCHistoryInfoMode;
[\IPProfile]
Call Priority Mode
[CallPriorityMode]
Modification: Option [3] “Emergency” added (all products).
Enables priority call handling.
[0] Disable = Disable (default).
[1] MLPP = MLPP Priority Calls handling is enabled.
[3] Emergency = Pre-emption of IP-to-Tel E911 emergency calls. If
the device receives an E911 call and there are currently no
available channels, the device terminates one of the channel calls
and sends the E911 call.