Filter
Top Products
Version 6.2 79 December 2010
SIP Release Notes 1. What's New in Release 6.2
1.10.2 SNMP New Features
The device supports the following new Simple Network Management Protocol (SNMP)
features:
1. ini File Configuration through SNMP:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature allows the configuration of ini file parameters that are not supported by the
Element Management System (EMS) tool, by using the existing acSysGenericINILine
SNMP parameter. This feature is useful for parameters that are currently not
supported by regular SNMP and where the user does not want to use the external ini
file.
To enter more than one line, the character set “$@$” must be added between lines of
ini file parameter settings.
2. Engine ID Configuration:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature allows the configuration of the SNMP Engine ID for SNMP v2/v3 agents,
by using the new ini file parameter, SNMPEngineIDString. This parameter is
configured as a string value of up to 36 characters and needs a device reset to take
effect. The Engine ID is used for authenticating a user attempting to access the SNMP
agent on the device.
The default value is 00:00:00:00:00:00:00:00:00:00:00:00 12 hex characters. The
provided key must be set with 12 hex values delimited by a colon (“:”).
If the supplied key does not pass validation of the 12 hex values or if it is set with the
default value, the engine ID will be generated according to RFC 3411.
Note: Before setting this parameter, all SNMPv3 users must be deleted, otherwise the
configuration is ignored.