Filter
Top Products
Version 6.2 49 December 2010
SIP Release Notes 1. What's New in Release 6.2
42. Redirect Number Overwritten by Destination Number for IP-to-Tel Calls:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature allows the device to overwrite the redirect number with the destination
number from the received SIP INVITE message in the outgoing ISDN call. This is
achieved by assigning an IP Profile (IPProfile parameter) defined with the
CopyDest2RedirectNumber parameter set to 1, to the IP-to-Tel Routing table
(PSTNPrefix parameter). Even if there is no SIP Diversion or History header in the
incoming INVITE message, the outgoing Q.931 Setup message will contain a redirect
number.
43. Replacing Calling Number with Redirect Number in Incoming ISDN-to-IP Call:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature allows the device to replace the calling number with the redirect number in
ISDN-to-IP calls. When such a replacement occurs, the calling name is deleted and
left blank. The outgoing INVITE message does not include the redirect number that
was used to replace the calling number. The replacement is done only if a redirect
number is present in the incoming call. This feature is enabled using the new
parameter, ReplaceCallingWithRedirectNumber.