Filter
Top Products
SIP Release Notes 80 Document #: LTRT-26901
CPE SIP Products
1.10.3 CLI New Features
The device supports the following new command-line interface (CLI) features:
1. Main CLI Configuration Modes:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature provides support for three main CLI configuration modes in which the
device can be configured. These include VoIP, system, and data. To enter one of
these modes, the following commands must be run:
• configure voip (or conf v) – accesses the VoIP configuration mode
• configure system (or conf s) – accesses the System configuration mode
• configure data (or conf d) – accesses the Data configuration mode
2. CLI show Command:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI
SNMP
EMS
CLI
This feature provides enhanced functioning of the CLI show command for displaying
the status of the device according to the three main CLI configuration modes - VoIP,
system, and data.
To view the relevant status, the following commands must be run:
• show voip <command> - displays VoIP status according to the available
<command> command (for an explanation, run show voip ?)
• show system <command> - displays system status according to the available
<command> command (for an explanation, run show system ?)
• show data <command> - displays data status according to the available
<command> command (for an explanation, run show data ?)
Note: The show commands can be accessed from any configuration mode, by using
the do command, for example, do show voip <command>.