![](http://pdfasset.owneriq.net/f/3a/f3a5e8a2-918e-46e1-bbfd-9749bc544db1/f3a5e8a2-918e-46e1-bbfd-9749bc544db1-bg25.png)
Chapter 4 Avaya P460 Layer 2 Features
Spanning Tree CLI Commands
In order to... Use the following command...
Enable/Disable the spanning-tree
protocol for the switch
set spantree enable/disable
Set the bridge priority for STA set port spantree priority
Enable/Disable the spanning tree
for switch ports
set port spantree
Set the port spantree priority level set port spantree priority
Set the cost of a port set port spantree cost
Display Spanning Tree Protocol
(STP) settings
show spantree
Avaya P460 Configuration Guide 27