Filter
Top Products
Chapter 5 Avaya P460 Layer 3 Features
Avaya P460 Configuration Guide 47
RIP2
RIP2 overcomes some of the shortcomings of RIP. Table 5.2 summarizes the
differences between RIP and RIP2.
RIP CLI Commands
Table 5.2 Differences Between RIP and RIP2
RIP2 RIP
Multicast addressing Broadcast Addressing
Event-driven Timer-based – update every 30
seconds
VLSM support – subnet information
transmitted
Fixed subnetwork masks
Security (authentication) No security
Provision for EGP/BGP (Route tag) No provision for external protocols
In order to... Use the following command...
Configure the Routing Information
Protocol (RIP)
router rip
Specify a list of networks on which
the RIP is running
network (Layer 3)
Redistribute routing information
from other protocols into RIP
redistribute (RIP)
Specify the RIP version running on
the interface basis
ip rip rip-version
Set the interface RIP route metric
value
default-metric
Set the RIP Send and Receive mode
on an interface
ip rip send-receive
Enable learning of the default route
received by the RIP
ip rip default-route-mode
Enable split-horizon with poison-
reverse on an interface
ip rip poison-reverse