Filter
Top Products
Chapter 5 Avaya P460 Layer 3 Features
42 Avaya P460 Configuration Guide
IP Configuration
IP Configuration CLI Commands
In order to... Use the following command...
Enable IP routing ip routing
Set ICMP error messages ip icmp-errors
Specify the format of netmasks in
the show command output
ip netmask-format
Create an interface or
enter the Interface Configuration
Mode
interface
Assign an IP address and mask to
an interface
ip address
Set the administrative state of an IP
interface
ip admin-state
Update the interface broadcast
address
ip broadcast-address
Define a default gateway (router) ip default-gateway
Define the interface RIP route
metric value
default-metric
Enable net-directed broadcast
forwarding
ip directed-broadcast
Set the IP routing mode of the
interface
ip routing-mode
Enable or disable the sending of
redirect messages on the interface
ip redirect
Check host reachability and
network connectivity
ping
Use this command when there is
more than one interface on the
same VLAN
enable vlan commands
Trace route utility traceroute