Filter
Top Products
Chapter 6 Switch Monitoring Features
Avaya P460 Configuration Guide 69
Enable/Disable the sending of
SNMP traps upon SNMP
authentication failure
set snmp trap auth
Set the number of retries initiated
by the Device Manager application
when it tries to send SNMP
messages to the device
set snmp retries
Set the SNMP timeout set snmp trap
Enable or disable generic SNMP
uplink/downlink traps from a port
set port trap
Display SNMP information show snmp
Display the number of retries
initiated by the Device Manager
application when it tries to send
SNMP messages to the device
show snmp retries
Display the default SNMP timeout. show snmp timeout
Display information on SNMP
generic link up/down traps sent for
a specific port
show port trap
Clear an entry from the SNMP trap
receiver table
clear snmp trap
In order to... Use the following command...