Filter
Top Products
2-14
Chapter 2
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
4.
Enter the
MAC Address
of the remote segment of the
VLAN.
5.
Select the
appropriate VLAN
from the VLAN pull-down
menu.
6.
Click
APPLY
to save your changes, or
CANCEL
to restore
the previous settings.
Co
nfiguring RED Pack Parameters
To configure RED pack parameters:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 2-2).
2. Click ATM in the Type column of the ATM Uplink module
you want to modify. The ATM Module Information dialog
box opens (Figure 2-4).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 2-9).
Figure 2-9. ATM Configuration Dialog Box
4. Click RED Pack Parameter . The RED Pack Parameters
dialog box opens (Figur e2-10). Tabl e2-5 describes the
parameters.
* Note: There are four RED Pack settings available. Each
default settings can be modified. Table 2-6 lists
the factory default RED Pack parameter settings.