2-38
Chapter 2
Cajun P550/P880 Manager User Guide
Setting Port Parameters
You can use the tool bar to set the following port parameters:
■
Setting the Port Speed
■
Enabling a Port
■
Disabling a Port
■
Setting a Port to Half-Duplex
■
Setting a Port to Full-Duplex
■
Enabling Port Auto-Negotiation
■
Disabling Port Auto-Negotiation
* Note: After selecting one of these icons in the tool bar, apply
and cancel buttons appear to the right of the icons.
Setting the Port Speed
The tool bar provides three icons that represent potential port speeds
of 10, 100, or 1000 Megabits Per Second (Mbps). The available port
speed displays in a white circle. The other port speeds display in
icons that use a gray circle to show that they are untrue for the port.
You can set the port speed, for example, of a 10/100 Mbps port to 10
or 100 Mbps. The current port speed has a dark gray border around
the circle, giving the impression of a depressed button.
* Note: After selecting one of these icons in the tool bar, apply
and cancel buttons appear to the right of the icons
(Figure 2-11).
