Filter
Top Products
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-15
Deleting QoS Domains
To delete QoS domains:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2. Click ATM in the Type column of the ATM Uplink module
you want to delete the QoS domain from. The ATM Module
Information dialog box opens (Figure 3-2).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 3-3).
4. Click QoS Settings. The QoS Domains dialog box opens
(Figure 3-7).
5. Select the QoS domain you want to delete.
6. Click DELETE to delete the QoS domain. The Delete QoS
Domain dialog box opens.
7. Click Yes to remove the QoS Domain, or No to restore the
previous setting.
Table 3-5. Default QoS Set Parameter
Parameter Definition
Name
Enter the new name of the QoS domain. The
default value is
defaultDomain.
Mux ATM Address
Enter the ATM address used as the destinatio
address of multiplexed Virtual Connections
(VCs).
Outbound Priority
Select a defined QoS set(s from the Outbound
Priority pull-down menu(s).