Filter
Top Products
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-11
If a requested QoS set is unavailable in an ATM network, a UBR
(Unspecified Bit Rate) SVC is setup instead.
The QoS system configuration includes:
■ Creating a QoS Domain
■ Modifying QoS Domains
■ Deleting QoS Domains
■ Managing QoS Sets
■ Modifying QoS Sets
■ Modifying QoS Sets
■ Creating a QoS Class Set
■ Configuring ATM Switch Port Parameters
* Note: You must create domains before creating sets.
Creating a QoS Domain
To create a QoS domain:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2. Click ATM in the Type column of the ATM Uplink module
you want to create a QoS domain for. The ATM Module
Information dialog box opens (Figure 3-2).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 3-3).
4. Click QoS Settings. The QoS Domains dialog box opens
(Figure 3-7). Table 3-3 lists the parameters.