Filter
Top Products
3-20
Chapter 3
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Figure 3-11. Modify QoS Set Dialog Box
8. Use the parameters described in Table 3-7 to modify your QoS
set.
9. Click APPLY to save your changes, or CANCEL to restore
the previous settings.
Table 3-7. QoS Set Creation Parameter
Parameter Definition
Name
Enter a user-assigned name for the set being
created. The default is predefinedBES1.
QoS Handl
Enter the handle to the QoS Set. The handle acts
as an internal reference number. Each QoS set
should have a unique QoS handle.
Inbound Priority
Map
Enter the mapping to be used on the inbound
side, that uses the QoS parameters for setting up a
data direct. Traffic on these priorities sets up a
data direct using the QoS Set, if the threshold is
reached.