Filter
Top Products
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-7
7. Click APPLY to save your changes, or CANCEL to restore
the previous settings.
Table 3-2. Virtual Port Configuration Parameters
Parameter Definition
Name
Enter a user-assigned name for this port,
for example, a drop name or the name of
the station or other device connected to
the port.
Physical Port
Select the physical port that this virtual
port resides on.
VPI
Enter the Virtual Path Identifier (VPI) for
the virtual port. Valid ranges are 0 - 255.
Administrative
Status
Select the administrative status of the
port. Options include:
•
Up
- The ATM desired operational
status.
•
Down
- Forces port down.
Default is
Up
.
Max VCI
Enter the maximum number of VCIs
(Virtual Channel Identifier) used by this
port. The minimum number is 32;
maximum number is 32767 across all
virtual ports on a given physical port. This
is based on the switch configuration.
Note:
If you create virtual ports, the
total VCI cannot exceed 32767 for
virtual ports combined on that
physical port.
Traffic Shape Rate
(cps)
Enter the maximum cell rate allowed on
this virtual port. The range is 0-1412830
cps. The default rate is full length
bandwidth. The traffic rate shape for all
virtual ports combined cannot exceed the
total traffic rate shape for that physical
port.
This is based on the type of module:
• OC-3 - 353207
• OC-12 - 1412830