Filter
Top Products
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
Configuring LANE
3-17
Table 3-6. Manage QoS Sets Dialog Box Parameters
Parameter Definition
Handle
Displays the QoS set handle number. The
handle acts as the internal reference
number.
Name
Displays the QoS set name.
Inbound Priority
Mapping
Displays the priority assigned to frames
received on virtual circuits opened by this
QoS set.
Traffic Class Displays the service class. Classes include:
• UBR
• nrtVBR
• rtVBR
• CBR
Note: Refer to “Creating a QoS Set”, later
in this chapter, for more
information about Service Class
Parameters.
Traffic Class
Parameters
Displays the service class parameters for
each QoS set. Service class parameters
include:
• CDVT - Cell Delay Variation
Tolerance
• PCR - Peak Cell Rate
• SCR - Sustained Cell Rate
• MBS - Maximum Burst Size
• peak-to-peak CDV - peak-to-peak
Cell Delay Variation
• maxCTD - Maximum Cell Transfer
Delay
• CLR - Cell Loss Ratio
Note:
For more information on the traffic
class parameters, refer to
Table 3-7.
RED Pack ID Displays the RED pack ID. Refer to
"Configuring RED Pack Parameters" in
Chapter 2 for more information.