Filter
Top Products
3-28
Chapter 3
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
6.
Click
APPLY
to save your changes, or
CANCEL
to restore
the previous settings.
Modifying ATM LEC Switch Ports
To modify an ATM LEC switch port:
1.
Select
Modules & Ports > Configuration
from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2.
Click the
number
in the Switch Ports column for the ATM
Uplink module you want to modify the switch ports for. The
Switch Ports dialog box opens (Figure 3-13).
3.
Click
Manage LEC Switch Port
. The ATM LEC Switch
Ports dialog box opens (Figu re3-14).
4.
Select of the ATM LEC switch port you want to modify in the
ID column.
* Note:
In order to change the virtual port parameters,
the Administrative Status state must be
Down
.
After modifying the parameters, change the
Administrative Status state to
Up
in order for
the changes to take effect.
Join Method Select the join mode used by this port. Values
include:
• LECS - Default - Select when ELANs are
controlled by a LECS.
• LES - Select if you know the ATM address
of the LES server that serves your ELAN.
Server ATM
Address
Enter the server address associated with this
port. The default ATM server LECS address i
the well-known address:
C5007900000000000000000000-
00A03E000001-00 (hex).
* Note:
The server ATM address is based
on the join-method.
Client Selector Enter the client selector. The valid range is 0 -
FF (hex). You must use a unique value for each
client.
Parameter Definition