Filter
Top Products
3-40
Chapter 3
Cajun P550/P880 ATM Uplink User Guide, Version 1.1
5. Complete one of the following:
•Click APPLY to save your changes.
•Click CANCEL to restore the previous settings.
•Click Previous Port to display the previous switch
port.
•Click Next Port to display the next switch port.
•Click Module to open the Switch Ports dialog box
(Figure 3-13).
Configuring All LEC Switch Ports on an ATM Module
To configure all switch ports on a module:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 3-1).
2. Click the number in the Switch Ports column for the ATM
Uplink module you want to configure all LEC switch ports
for. The Switch Ports dialog box opens (Figur e3-13).
3. Click All Module Switch Ports Configuration. The Switch
Port Configuration - All Ports For Module <#> dialog box
opens (Figu re3-24).
Figure 3-24. Switch Port Configuration - All Ports for
Module <#> Dialog Box