Filter
Top Products
Cajun P550/P880 Switch ATM Uplink User Guide, Version 1.1
Configuring RFC 1483
4-11
Table 4-2. ATM LInk for Virtual Switch Port Parameters
8. Click APPLY to save changes, or CANCEL to restore the
previous settings.
Deleting ATM Links for Virtual Switch Ports
To delete ATM Links:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 4-1).
2. Click the number of the switch port in the Switch Ports
column of the ATM Uplink module you want to delete ATM
links from. The Switch Ports dialog box opens (Figur e4-2).
3. Click Manage Virtual Switch Ports. The Virtual Switch
Ports dialog box opens (Figure 4-3).
* Note: You may have to scroll down to see the Manage
Virtual Switch Ports link.
Parameter Description
Name
Enter the user-defined name for the ATM Link.
Administrative
Status
Select the administrative status of the port.
Options include:
•
Enabled
- The ATM desired operational
status.
•
Disabled
- Forces port down.
Default Channel
Select the Default Channel for packet
replicating VSPs from the pull-down menu.
Note:
If you have turned on packet
replication, do not use UBR.
Fail Over ATM
Link
This parameter is not supported in this release.
Outbound
Priority
Select the outbound priority from the pull
down menu.
Note:
It is recommended that you select a
priority level. If you select None, the
Priority Level will be dropped without
notification.