Filter
Top Products
56 CPS Installer/User Guide
Port Alert Delete Command Parameter
Parameter Description
<port> Port number in the range 1-8 for a CPS810 or 1-16 for a CPS1610.
Example
The following command deletes defined alert strings from port 3.
> PORT 3 ALERT DELETE
Alert-strings assigned to port 3:
1) The first alert string
2) The second alert string
3) The third alert string
4) The fourth alert string
Select Alert-string(s) to delete>
The alert string numbers specified at the prompt will be deleted.
Port Break command
The Port Break command sends a serial break signal to the device to which
you are attached.
Access right: BREAK; Access level: A and AA
Syntax
PORT BREAK
Port History command
The Port History command accesses a CPS serial port’s history mode while
you are attached to the port. When you are in history mode, the PORT
HISTORY> prompt appears, and you may search the port’s history buffer for
specified strings.
For more information, see Managing the Port History Buffer in Chapter 3.
Access right: None needed; Access level: All
Syntax
PORT HISTORY
When you are in port history mode, you may issue the following commands.