Filter
Top Products
Chapter 5: CPS Commands 77
Show User Command Display Fields (Continued)
Field Contents
Locked YES if user is locked-out, NO if not.
Last Login System up time value when the user logged in.
Port Serial port to which user is connected.
Username Username.
Duration Duration of user’s session.
Socket Telnet CPS socket number.
From Socket Telnet client IP address and socket number.
A Show User All command display includes the information in the following table.
Show User All Command Display Fields
Field Contents
User Username.
Pass YES if user has a password defi ned, NO if not.
Key YES if user has an SSH key defi ned, NO if not.
Lock YES if user is locked-out, NO if not.
Level User’s access level. If a level was not confi gured, access rights
determine the level:
Users with SCON access => APPLIANCEADMIN.
Users with USER or PCON but not SCON => ADMIN.
Otherwise, USER level is assigned..
Access User’s access rights.
SPC Command
The SPC command changes settings for an SPC device and its sockets.
NOTE: This command confi gures the port for use with DSView. For standalone use of the
SPC, this command should not be used, and the CPS port to which the SPC is attached
should be confi gured as TD=Console.
Access right: SCON or PCON; Access level: A and AA
Syntax
SPC <port>|ALL [MINLOAD=<amps>] [MAXLOAD=<amps>]
[SOCKET <socket>|ALL]
[WAKE=ON|OFF] [ONMIN=<time>] [OFFmin=<time>]