Filter
Top Products
Section 2: Basic Installation AXIS 700 User’s Manual
18
4. Press Enter to edit the IP address:
5. Press Menu to move through the digits and highlight each
digit, one at a time.
6. Use to increase or decrease each highlighted digit, as
required.
7. Press Enter to confirm the changes.
8. Press Menu to display the default router address:
9. Press Enter to edit the default router address:
10. To change the value, repeat steps 5-7 above.
11. Press Menu to display the subnet mask:
12. Press Enter to edit the subnet mask:
13. To change the value, repeat steps 5-7 above.
14. Press Menu to display the node address. This address is not
editable. The node address should equal the AXIS 700 serial number
found on the underside label of the unit.
(GLW,3DGGUHVV
'HIDXOWURXWHU
(GLWURXWHU
1HWPDVN
(GLWQHWPDVN