Filter
Top Products
Appendix A: Troubleshooting AXIS 700 User’s Manual
74
Unresolved name:
<server name>
Cannot find the IP address mapped to <server name>.
Not available:
<server address>
Cannot establish communication with the server specified
in <server address>. Please try again later.
Login failed:
<server address>
Incorrect FTP server password specified for the file
destination.
Disconnected:
<destination>
The connection to the destination specified in
<destination> has been lost. The image transfer has been
aborted.
Connection failed Connection failed.
No valid mail recipient
found
All the selected e-mail destinations were incorrect.
Illegal address
<recipient>
Incorrect e-mail address specified for the e-mail
destination.
Illegal directory on:
<server address>
The directory specified for the file destination does not
exist (no directory)
Unable to open file on
Default file name is missing (no file name, file name
missing).
Write error on:
<server address>
Insufficient access rights to the directory specified for the
file destination.
No info file on:
<server address>
The information file could not be stored on the FTP
server. Possible reasons are lack of file space or naming
conflicts. The image file will be removed.
Paper jam
Paper jam in the scanner. The scan job is terminated.
Remove paper to continue scanning.
No paper in scanner
No paper in the sheetfeeder. Applies to scanners without
a flatbed only.
Scanner warming up,
please retry
The scanner lamp must reach the correct temperature
and intensity.
Scanner not ready,
please check scanner
and retry
The scanner is busy. Please try again. If the error occurs
repeatedly, contact your scanner supplier.
The ADF cover is open,
please check and retry
The ADF cover is open, please check it and retry.
Could not connect to
LDAP server
Could not connect to the LDAP server, (illegal LDAP
server).
The user specified for
LDAP is invalid
The user specified for LDAP is invalid (illegal LDAP user).
Invalid LDAP credentials
(e.g. invalid user or
password)
Invalid LDAP credentials (e.g. invalid user or password).
Message Description