Filter
Top Products
Section 2: Basic Installation AXIS 700 User’s Manual
26
Using BOOTP
in UNIX
Follow these steps to download the IP address using the BOOTP
method:
1. Append the following entry to your boot table. This is typically
performed by editing the file
/etc/bootptab.
where:
Example:
2. If necessary, update your host table and alias name databases as
required by your system.
3. Start the BOOTP daemon, if it is not already running. This is
typically performed using the command
bootpd -a
4. Restart the AXIS 700 to download the IP address, default router
address and subnet mask. You can perform a restart remotely via the
AXIS 700 web interface. See “Specifying System Settings ”on page 46.
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<IP address>:\
:sm=<subnet mask>:gw=<gateway field>
ht
ether for Ethernet
vm rfc1048
ha
The Ethernet or node address, i.e. the AXIS 700 serial number
ip
The IP address of the AXIS 700
sm
The subnet mask
gw
The default router address
spserv:ht=ether:vm=rfc1048:\
:ha=00408c24c01c:ip=172.16.253.80:\
:sm=255.255.0.0:gw=172.16.253.254