Filter
Top Products
Section 2: Getting started
Axis NPS 530/532 User’s Manual 13
Network Installation
1. Record the serial number of your NPS 530/532. You will need this
number for the setup.
2. NPS 530 only: Connect your NPS 530 to the network using a
twisted-pair (10baseT) Ethernet cable.
3. NPS 532 only: Connect your NPS 532 to the network using a thin-
wire (10base2) Ethernet cable.
Note: Each NPS print server is preconfigured with a unique Node Address
(identical to the serial number). You can change this to a Locally
Administrated Address, see page 68.
The installation is now completed. Proceed with the setup sections for
NetWare, Windows, OS/2, Unix and/or Macintosh.
Before you begin:
• Make sure that your network is ready to accept a new node.
• Any network configuration should always involve the network
manager.