Filter
Top Products
Section 5: Setup for OS/2
Axis NPS 530/532 User’s Manual 41
Create a Print Queue
Each Axis print server port will be seen as a print queue destination by the
OS/2 Print Manager. Print queue destinations are referred to as devices in
OS/2 version 1.x and ports in version 2.x. They appear as pipe names, e.g.
\PIPE\AX110086.LP1, etc. Assigning Axis print server ports as print
queue destinations follow the standard procedures under OS/2. The
procedures are identical for LAN Server and LAN Manager, but differ
between OS/2 versions 1.x and 2.x as shown below.
The examples below demonstrate how to create a new print queue and
assign it to an NPS 530/532 printer port. Alternatively, you may re-direct
an existing queue to an NPS 530/532 port.
OS/2 Version 1.x The print queue assignment under OS/2 version 1.x requires two
operations – the definition of a printer, and the definition of one or more
print queues for that printer. Follow these steps to create a print queue
and assign it to an NPS 530/532 printer port:
1. Double-click the Print Manager icon.
2. Click the Setup menu option, then select Printers...
3. Click Add to make a new printer definition.
4. Type a printer name in the Name field.
5. Select a Device (a pipe name, e.g. \PIPE\AX110086.LP1).
6. Select a printer driver suitable for the printer attached to the NPS 530/
532.
7. Click Add, then click OK to confirm the new printer definition.
8. Click the Setup menu option, then select Queues...
9. Click Add to make a new print queue definition.
10.Type a queue name in the Name field (preferably the printer name
assigned above).
11.Select the previously defined printer.
12.Click Add, then click OK to confirm the new queue definition.