Filter
Top Products
Section 6: Setup for Unix systems
Axis NPS 530/532 User’s Manual 51
Example: Below is a sample FTP session showing how to up-load axinstall (user
entries appear in bold):
The axinstall script has now been up-loaded to your host.
Run axinstall Type the command sh axinstall to run the script.
You will be guided through the setup by a step-by-step procedure.
Axinstall will first detect what kind of Unix system you are using, and
then suggest a suitable print method. The suggested print method will be
sufficient in most cases, but you can also choose one of the PROS
methods for more advanced print capabilities. See page 52 for a brief
overview of the different print methods. For more detailed information,
please refer to the NPS Technical Reference.
After you have selected a print method, axinstall will automatically set up
the necessary print queues, filters, etc. You will then be offered to make a
test printout, and after that the setup is completed.
> ftp salesdept
Connected to salesdept.
220 Axis NPS 53X FTP Print Server V5.00 ready.
Name (salesdept:thomas): root
331 User name ok, need password
Password: pass
(not visible)
230 User logged in
ftp> get axinstall
200 PORT command successful.
150 Opening data connection for axinstall (192,36,253,4,13,223)
226 Transfer complete.
local: axinstall remote: axinstall
27545 bytes received in 4.1 seconds (6.5 Kbytes/s)
ftp> bye
221 Goodbye.
>