Filter
Top Products
Section 8: Advanced Options
60 Axis NPS 530/532 User’s Manual
Strings Before and After Print Jobs
These string functions provide a way to send printer control commands
before and after each print job. They may be specified individually for
each logical printer.
All strings are entered as hexadecimal byte values.
Example 1: Assume that the logical printer PR5 is configured as a PostScript printer.
To append the PostScript End of File character (ctrl-D, hex 04) after each
print job, edit the following entry in your config file:
Example 2: You have a HP LaserJet printer with dual input bins, and want to print on
pre-printed forms when using the logical printer PR4. The standard
forms are taken from bin 1, and the pre-printed forms are taken from bin
2. The strings before and after print jobs should then contain commands
to select bin 2 (
E
C
&l4H) and bin 1 (
E
C
&l1H) respectively. Edit the fol-
lowing entries in your config file:
PR5_AFT. : 04
PR4_BEF. : 1B 26 6C 34 48
PR4_AFT. : 1B 26 6C 31 48