Filter
Top Products
Section 3: Setup for NetWare
Axis NPS 530/532 User’s Manual 23
NPS 530/532
Configuration
The configuration involves specifying the configuration file server. This is
done using AXCFG, the Axis NPS installation software on the disk
supplied with the NPS 530/532. Follow the instructions in the read.me
file on the disk to install the software, then proceed as follows:
1. Start AXCFG, and select NetWare.
2. Select No at the ‘Look for old print servers’ prompt unless you are
configuring an NPS 530/532 with software revision prior to 4.20.
3. Choose Select All Networks, then select your NPS 530/532.
4. Type root and pass at the login prompt.
5. Select NETWARE MENU.
6. Select CONFSERV.
7. Type the name of the NetWare file server dedicated as the configura-
tion file server, then select OK.
Example: Use KILROY as configuration file server
8. Select Save, then select Cancel until AXCFG closes down.