Filter
Top Products
Section 3: Setup for NetWare
Axis NPS 530/532 User’s Manual 27
Configure the
NPS 530/532
The configuration involves specifying which NetWare print servers and
printer numbers the NPS 530/532 shall attach to. This is done using
AXCFG, the Axis NPS installation software on the disk supplied with the
NPS 530/532. Follow the instructions in the read.me file on the disk to
install the software, then proceed as follows:
1. Start AXCFG, and select NetWare.
2. Select No at the ‘Look for old print servers’ prompt.
3. Choose Select All Networks, then select your NPS 530/532.
4. Type root and pass at the login prompt.
5. Select NETWARE MENU.
6. Select RPRINT1.
7. Type the name of the NetWare print server and the printer number
(4.xx: Use printer numbers 1 and higher). Use the name and number
from the NetWare configuration earlier.
Example: Use printer 0 at BILBO_NLM as remote printer
8. To specify more print servers, select RPRINT2 through RPRINT8
in consecutive order. Repeat step 7 for each print server.
9. Select Save, then select Cancel until AXCFG closes down.