Filter
Top Products
Section 3: Setup for NetWare
Axis NPS 530/532 User’s Manual 17
Print Server Mode (Automatic)
The setup procedure involves adding a print server and linking it to one
or more print queues. Both steps are carried out in PCONSOLE.
Add a Print Server Follow these steps to add a print server to your NetWare environment:
1. Log in to a file server from a client workstation.
2. Start PCONSOLE.
3. NetWare 4.xx only: Press <F4> to switch to Bindery Mode.
4. Select Print Server Information (3.xx) or Print Servers (4.xx).
5. Press <Insert> to add a new Print Server.
6. Enter the Print Server Name: AXIS<nnnnnn>
(see notes below)
<
nnnnnn> are the last six digits of the NPS 530/532 serial number.
7. Press Escape to return to the Main Menu.
Repeat this procedure for each file server using the NPS 530/532.
Notes: 1. If the serial number of your NPS 530/532 is 00408C110086
, then
the default name is AXIS110086
. The serial number is found on the
label at the back of the NPS 530/532.
2. You may change the default name using AXCFG, the Axis Configura-
tion Software. This must be done before running PCONSOLE.
3. The print server name is case insensitive in print server mode. Both
AXIS110086 and Axis110086 are valid default print server names.