Filter
Top Products
Section 4: Setup for Windows
36 Axis NPS 530/532 User’s Manual
Client-Server
printing:
Server setup
Follow these steps to install your NPS 530/530 for client-server printing
at a Windows NT server:
1. Choose a workstation that you want to use as server for network print-
ing. The server must be available at all times, and must have sufficient
hard disk space for spooling print jobs.
2. Install Axis Print Utility on the server.
3. Set up your NPS 530/530 following steps 1 - 9 on page 35 (do not
close Print Manager).
4. In the Printer menu, select Properties...
5. Check the Share this printer on the network box, then click OK.
The server setup is now completed. Set up the clients as described below.
Important: Both Axis Print Utility and Print Manager must be running
when you print through your NPS 530/530. We strongly recommend
that you copy the Axis Print Utility icon into your Startup folder.
Client-Server
printing:
Client setup
Follow these steps to install your NPS 530/530 for client-server printing
at a Windows NT client:
1. Open Print Manager.
2. In the Printer menu, select Connect to printer...
3. In the Shared Printers list, select the printer you want to use. Click
OK.
The client setup is now completed and you can immediately print
through your NPS 530/530.