Filter
Top Products
Section 6: Setup for Unix systems
44 Axis NPS 530/532 User’s Manual
Section 6
Setup for Unix systems
This section covers the setup for TCP/IP in a Unix environment. The
steps described on the following pages are:
1. Prepare your system for a new TCP/IP node.
Procedures: Find an unused Internet (IP) address and choose a unique
host name for your NPS 530/532. Update your host table and alias
name data bases.
2. Set up the NPS 530/532 as a TCP/IP node.
Procedures: Down-load the IP address to your NPS 530/532 using the
arp, rarp or bootp metod.
3. Set up and attach a print queue at your Unix workstation.
Procedures: Use the automatic axinstall script to complete the setup.
Up-load and run the script, then follow the instructions on your
screen.
Before you begin: • Make sure that the NPS 530/532 is powered on and attached to the
network.
•You will need root privileges on the system.
• Have the serial number found on the back of the NPS 530/532
available.
• Any network configuration should always involve the network
manager.