Filter
Top Products
Section 3: Setup for NetWare
22 Axis NPS 530/532 User’s Manual
NetWare 4.xx: 1. Log in as supervisor to the NetWare server, and start PCONSOLE.
2. Press <F4> to switch to Bindery Mode.
3. Select Change Current NetWare Server, then select the file server at
which you want to keep the queue and printer configurations. Make
a note of the configuration file server name, you will need it during the
NPS 530/532 configuration.
4. Select Print Servers, then add the new print server AXIS<nnnnnn>.
See “Add a Print Server” (page 17) for details.
5. Select AXIS<nnnnnn>.
6. Select Serviced NetWare Servers.
7. Press <Insert> to see the list of Available NetWare Servers. Add all
file servers you want the NPS 530/532 to log in to, then press <Esc>
to get back to the Print Server Information menu.
8. Select Printers. An empty list of Defined Printers appears. Printers are
numbered from 0 to 255 in the order that they are defined. The print-
ers numbered 1–8 correspond directly to the NPS 530/532 logical
printers PR1–PR8. No other printer numbers are used by the NPS
530/532.
9. Press <Insert> to define printer number 0. Name it ‘DUMMY’,
‘UNUSED’ or similar to indicate that this printer is not used.
10.Press <Insert> to define printer number 1. Name it ‘PRINTER_1’
or whichever name you prefer. The printer names are not used by
the NPS 530/532.
11.Select printer number 1. The printer is by default named ‘Printer 1’.
12.Select Print Queues Assigned and press <Insert> to see the list of
Available Print Queues.
13.Select the queues you want printer number 1 to service. Repeat steps
10 – 13 for each additional printer number you want to define.
14.Exit PCONSOLE.