Filter
Top Products
43
Using the Web-Based Advanced User Interface
43
section
2
1
3
4
5
6
7
8
9
10
12
Setting WPA2-Enterprise (RADIUS) Settings
If your network uses a radius server to distribute keys to the clients,
use this setting.
1. From the “Security Mode” drop-down menu, select “WPA/WPA2—
Enterprise (RADIUS)”.
2. Select “WPA2-RADIUS” in the “Authentication” field.
3. In the “Encryption Technique” field, select “AES”. This setting will
have to be identical on the clients that you set up.
4. Enter the IP address of the radius server into the “Radius Server”
fields.
5. Enter the radius key into the “Radius Key” field.
6. Enter the key interval. Key interval is how often the keys are
distributed (in packets).
7. Click “Apply Changes” to finish. You must now set all clients to
match these settings.
Setting WEP Encryption
Note to Mac users: The “Passphrase” option will not operate with
Apple
®
AirPort
®
. To configure encryption for your Mac computer, set
the encryption using the manual method described in the next section.
1. Select “128-bit WEP” or “64-bit WEP” from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter you WEP
key manually by typing in the hex WEP key manually, or you can type
a passphrase in the “PassPhrase” field and click “Generate” to create
a WEP key from the passphrase. Click “Apply Changes” to finish. You
must now set all of your clients to match these settings.